| |
|
|
| |
| CE-T Analog Electrical transducer |
|
|
| CE-PJ02,QJ02,PJ31,QJ31,PJ41,QJ41 |
| PRODUCT: |
Power Analog Transducer |
| SERIES: |
CE-PJ02 1 Element Active Power
CE-QJ02 1 Element Reactive Power
CE-PJ31 Active Power (3-Phase 3-Wire)
CE-QJ31 Reactive Power (3-Phase 3-Wire)
CE-PJ41 Active Power (3-Phase 4-Wire)
CE-QJ41 Reactive Power (3-Phase 4-Wire) |
| INPUT RANGE: |
75V*1A~500V*25A |
| OUTPUT: |
5V or 4-20 mA |
| ACCURACY: |
0.5% |
| RESPONSE TIME: |
£600 mS |
| POWER SOURCE: |
+12V or +15V or +24V |
| LOAD CAPABILITY: |
Voltage Output³2kW
Current Output£250W |
| QUISCENT POWER CONSUMPTION: |
£960mW |
|
| Specifications |
 CE-PJ02,QJ02,PJ31,QJ31,PJ41,QJ41 |
 CE-PJ02,QJ02,PJ31,QJ31,PJ41,QJ41 |
 CE-PJ02,QJ02,PJ31,QJ31,PJ41,QJ41 |
| Series |
Operating Principle |
Isolation Voltage |
Response Time
Range 0 to 90% FS |
Overload Capacity |
Quiescent Power(mW) |
Mounting |
| Vz,Vd,Vg,Iz
Output |
Iy Output |
CE-PJ02
CE-QJ02 |
Electro-magnetic |
£2500VDC |
£900ms |
Current: 20 Times 5/sec
Voltage: 2 Times 10/sec |
300 |
420 |
Din rail |
CE-PJ31
CE-QJ31
CE-PJ41
CE-QJ41 |
840 |
960 |
| Series |
Output |
Power Source |
Window
Opening
(mm) |
Case Style |
Accuracy |
Input Range( RMS ) |
| Voltage |
Current |
CE-PJ02
CE-QJ02
CE-PJ31
CE-QJ31
CE-PJ41
CE-QJ41 |
3---0~5VDC (Vz)
4---0~20mA (Iz)
5---4~20mA (Iy)*
8---0~10V DC(Vd) |
2---12V
3---15V |
AF4
B-F6.5 |
S3 |
0.5 |
75V, 110V,
220V, 250V,
380V, 400V,
500V |
1A, 2A ,
5A, 10A,
15A, 20A,
25A |
Part Number Example: CE-PJ41-52BS3-0.5/0~250V*0~5A
Description: Power Transducer, Input Voltage: 0~250V, Current: 0~5A,
Output: 4~20mA, Power Source: +12V, Window: F6.5mm,
Accuracy: 0.5%, Case style: S3
1 Explain for Code
| Code |
3 |
4 |
5 |
8 |
| Symbol |
Vz |
Iz |
Iy |
Vd |
| Definition |
DC Voltage
Output |
DC Current
Output |
DC Current
Output |
DC Voltage
Output |
2 Explain for
* Loop resistance from 0 to 250W.
Contact factory for loop resistance
above 250 O |
| Applications |
- Energy Management
- Motor Efficiency
- Multi-point power sensing
- Remote power sensing over long distances
Notice:
- The input current must pass the window opening in the direction
shown in Reference Diagram of Connection.
- The output signal of 3-phase power transducer corresponds to
total power of three phases.
- For application above 25 Amp use an external current. Connect
the secondary leads of the current transformer to the input of
the Transducer.
|
|
|
| |
|
|
|
