Sensors & Accessories
» Water Detection Sensor
Model: SP-10
» Temperature Sensor
Model: TS-70
» Temperature & Humidity Sensor
Model: THS-90R, THS-90RD
» Intelligent DC Supply/Charger
Model: DPC-1204E
» 3db Dual-Band Antenna
Model: ANT-3M, ANT-5M, ANT-6M
PICOBOX Water Detection Sensor was specially designed to provide early detection of water sources, prevent damage and downtime from water leaks & spills around data centres, air-conditioning units, chilled water pipe, plumbing and condensate line, clogged drains, sprinkler systems and even building leaks. ▲Top
| MODEL |
SP-10 |
|
| Type | Spot water detection probe |
|
| Operating Voltage | 12-24V AC/DC (non-polarity) | |
| Output Rating |
NC Relay Dry Contact, 24V, 1A (non-polarity) | |
| Sensing Height |
1mm to 6mm (adjustable) |
|
| Dimension |
24 (H), 44 (diameter) mm |
|
| Weight | 120g |
|
| Enclosure |
Chrome plated, brass material |
|
| Interface |
4-wire (2 power, 2 contacts), 3 meters |
|
PICOBOX Temperature Sensor (TS-70) was designed to measure ambient temperature levels of a room or a single enclosure. The compact unit housed an analog output of 4-20mA with noise filter and operating on 12-24V DC. ▲Top
| MODEL |
TS-70 |
|
| Chassis | ABS plastic |
|
| Operating Voltage | 12-24V DC |
|
| Output Rating |
4-20mA, with noise filter |
|
| Dimension | 75(L) x 55(W) x 25(H) mm |
|
| Accuracy | +/- 0.5°C |
|
| Range | 0 - 70°C |
|
| Interface |
2-wire lop powered, non-polarized |
|
.jpg "Sensor & Accessories divider - Copy (4).jpg"){kind=small}
PICOBOX Temperature & Humidity Sensor was designed to measure both ambient temperature and humidity level of a room or a single enclosure. Comes in two models, with LCD display (THS-90RD) and without LCD display (THS-90R). The unit is using 4-20mA analog output with noise filter and operating on a 12V DC voltage. ▲Top
| MODEL |
THS-90R |
THS-90RD |
| Chassis | ABS plastic |
|
| Operating Voltage | 12V DC | |
| Output Rating |
4-20mA, with noise filter | |
| Dimension |
100(L) x 80(W) x 30(H) mm |
|
| Weight | 150g |
|
| LCD Display |
No |
Yes |
| Accuracy |
+/- 0.3°C, +/-2% RH |
|
| Range |
0-50°C / (-20)-80°C / (-40)-60°C, 0-100% RH |
|
| Interface | 4-wire (2 power, 1 temperature, 1 humidity) |
|
.jpg "Sensor & Accessories divider - Copy (3).jpg"){kind=small}
Intelligent DC Supply / Charger
A companion product for the EMS system, this intelligent back-up battery will trigger an SMS alert to user in any case of power failure; making sure that user get notified of the alarm and at the same time providing at least 2 hours of power supply to the EMS unit. ▲Top
| MODEL |
DPC-1204E |
|
| Input |
230V AC |
|
| Output | 12V, 3A max, 1A continuous | |
| Battery |
12V, 4AH sealed lead acid (External) |
|
| Dimension |
160(D) x 150(W) x 65(H) mm |
|
| Weight |
1.8Kg (charger), 790g (battery) |
|
.jpg "Sensor & Accessories divider - Copy (2).jpg"){kind=small}
External antenna designed to boost up the GSM signal in an enclosed area. Extremely useful in certain cases where the GSM signal is weak. ▲Top
| MODEL |
ANT3DB |
|
| Type |
3db gain 900/1800Mhz antenna |
|
| Mount | Magnetic base mounting | |
| Length |
32 cm |
|
| Cable length |
3M, 5M, 6M, 8M, 10M and 15M |
|